Ignition cylinder problems do happen, even in newer vehicles. They can come up for anyone and when they do, they can be quite frustrating. No one ever wants to deal with car issues. Your immediate fear is likely that it will cost way too much money. But the good news is, ignition cylinder problems can be handled for an affordable price if you just know where to turn. We recommend turning to a locksmith for help. Due to wear and tear and excessive use, ignition lock cylinders can ultimately need to be repaired or replaced. We are going to go over why ignition cylinder problems do arise and what to do when they happen to you!
What causes problems with ignition cylinders?
So, you know that ignition cylinder issues can come up. But what is the cause? Is there anything you can do to prevent them from occurring? An ignition cylinder can suffer unnecessary use and wear and tear, which of course will cause issues over time. These are problems that do need to be taken care of, though, because they can become worse.
You need to determine if the ignition cylinder needs to be repaired or replaced. Sometimes, it looks as though the ignition cylinder is a problem, but the issue is something else completely.
Here are some scenarios that might help you determine if the ignition cylinder is problematic.
The Car Does Not Start or Sometimes Stalls
What tends to happen when you turn the key for your car? Does the car start right away? Or does it sometimes take a few attempts? If the battery has already been checked and you know this isn’t the cause of the problem, then it very well might be the ignition cylinder.
As for another scenario, perhaps the key gets stuck when you put it in to start the car. Or does it not go in smoothly and you sort of have to jiggle it around? Again, this could be the result of the ignition cylinder needing replacement. Carlton’s Locksmith is the place to call for this type of problem. We can send an automotive locksmith to you to take a look at your ignition cylinder no matter what make or model you drive. We are experienced with them all!
The Lights Flicker on the Dashboard
You might have noticed flickering dashboard lights starting to become a problem. Whether or not it is an electrical issue with your car might be something that an needs to be determined, but it could very well be an ignition cylinder problem. A locksmith can help with this.
The Steering Wheel Is Stuck
Is something possibly off with the steering wheel and ignition? This is fairly simple to figure out. You can do this on your own. Turn the steering wheel and then go ahead and shut off the ignition. When you turn off the ignition and turn the steering wheel, notice what happens. If the steering wheel gets stuck, then the ignition isn’t going to turn over. Simply adjusting the steering wheel by turning it from one side to another might help. This might be all you need to release the key if it’s otherwise trapped.
Ignition Cylinder is Clogged
Blockage or debris does happen, so this is why it is important to clean even parts of your vehicle you might not usually think about, such as the ignition cylinder. Take a peek inside and take note if you can see any debris in there. Even a miniscule amount of debris can lead to the key tumbler getting stuck. The answer might be as simple as using pressurized air to clean it out.
If you need help, call an automotive locksmith!
It’s always an option to reach out to an automotive locksmith. This is an individual who will be able to carry out automotive services for locks and keys no matter what make or model you drive. If the problem with your ignition cylinder has not been solved after trying the tips mentioned above, or if you would feel better having someone else deal with the problem, it’s best to call in a technician You can save money by using a locksmith that specializes in auto solutions. There are some steps to make sure you hire someone you can count on. Make sure they can work with any make or model – Mazda, Ford, Audi, Dodge, Lexus, BMW, Hyundai, Kia, Nissan, Mitsubishi and Toyota should all be familiar to the expert. You might also want to look into the option of 24/7 emergency services. If you end up being unable to access your car, leaving you stuck, you will want someone who will come to you right away. Here in Redan, GA, you have the option of reaching out to us.
Ignition cylinder problems are frustrating to deal with when these issues arise. But try not to fret, because there are always solutions when it comes to dealing with ignition cylinder problems! Hopefully you now have a better idea of what to do.
We have gone over a few different moderately easy ways to differentiate whether you do or do not have an ignition cylinder problem on your hands. Remember, some issues are easier to solve than others. Others might require the hands of an experienced auto locksmith.
Ignition cylinder problems can sometimes be handled by the driver. There are numerous reasons for why you might have vehicle ignition lock cylinders. Hopefully now you have a better understanding of these reasons and know what to do. Always have the contact information of a locksmith that you can trust saved in your phone, so you aren’t left scrambling to find a locksmith at the last minute.
Source: Carlton’s Locksmith: What to Do, Ignition Cylinder Problems
For more information, contact us:
Locksmith Service 24 Hours a Day
Monday through Sunday, all day
Email: service@redanlocksmith.net
Phone: (404) 902-5141
www.redanlocksmith.net
